12-21-2017 | Natural Resources Canada
The operation of wind turbines in a cold climate such as Canada’s involves additional challenges not present in warmer locations:
- Accumulation of ice on wind turbine blades resulting in reduced power output and increased rotor loads;
- Cold weather shutdown to prevent equipment failure; and
- Limited or reduced access for maintenance activities.
Based on actual measurements, icing can occur up to 20% of the time between the months of November and April. Wind turbines must therefore be able to sustain at least limited icing without incurring damage that would prevent normal operation.
Wind turbine manufacturers are increasingly recognizing the impacts of cold climate operation and are building turbines better equipped to handle winter conditions. With the installation of “cold weather packages” which provide heating to turbine components such as the gearbox, yaw and pitch motors and battery, some turbines can operate in temperatures down to -30C.
Various types of rotor blade de-icing and anti-icing mechanisms, such as heating and water-resistant coatings are currently being employed, as well as operational strategies to limit ice accumulation.
However, it isn’t clear which cold climate solutions deliver the highest performance while still being cost-effective, making this an active area of research. The frequency, severity and type of icing event varies significantly by region, meaning that mitigation methods need to be tailored to local conditions. Different manufacturers’ turbines may also be more or less suited to particular solutions. Improving the accuracy of ice detection and forecasting systems represent another avenue for minimizing cold climate losses.
The goals of CanmetENERGY-Ottawa (CE-O)’s cold climate research program are to analyze the impact of cold climate operation on Canadian wind energy generation and to support the development of targeted solutions to improve cold weather performance
Read Full Article
Ice Detection and Forecasting
Atmospheric icing is a major concern for wind farms operating in cold climates, affecting installation, operation and maintenance, and negatively influencing power production and profitability. Being able to accurately predict the type, intensity and duration of icing episodes can allow wind farm operators to optimize their operational strategy, anticipate production losses and invest in appropriate ice mitigation technologies. To this end, CE-O contracted with the TechnoCentre éolien (TCE) regarding the development and validation of the GEM-LAM-Jones-Makkonen (GLJM) model for forecasting meteorological icing at Canadian wind farms. This model is the result of pairing the GEM-LAM weather forecasting model developed by Environment Canada, available to the public at no cost, with models designed by Jones and Makkonen to predict icing accretion. A summary report entitled “Development and Validation of an Ice Prediction Model for Wind Farms” is available on the Wind Energy TechnoCentre Web page.
Analysis of cold climate operation
While severe icing events at particular wind farms can create headlines, one aspect that is not readily apparent is the overall impact of cold climate on energy generation in the Canadian wind fleet. There is a need to gain a better appreciation of the scale of the problem, so that research and development efforts can be strategically directed towards mitigating such losses.
This is the basis for CE-O’s assessment of cold climate on Canadian wind plant performance. For this study, CE-O analyzed production data from 23 wind farms across eight Canadian provinces with the objective of quantifying the degree to which cold climate operation affects wind energy production in Canada.
Read Full Article